Cutting blade is attached to the grinding wheel. In the production and manufacture of industry, it is sometimes required to make certain grinding and cutting. The use of cutting plates is to make some mechanical products grinding. It is an important abrasive grinding tool we need to use. Here, the grinding wheel cutting is introduced. Precautions for safe use of the film.
Now the cutting chip technology is increasingly developed, the most hard cutting film should be the diamond material, it is mainly composed of the two parts of the matrix and the knife head, the matrix is the main support part of the bond knife head, and the cutter head is the part of the cutting function during the use process. In the process of use, attention should be paid to:
1, when replacing the cutting piece, turn off the power supply first and hang the warning board. The cutting piece must be concentric and fastened so as not to fall off the wounding person.
2, in operation, if the cutting piece is damaged, it must stop using immediately, replace the perfect cutting piece and run again. After the cutting is finished, the power supply is turned off first. When the wheel is stopped to turn, then the object is taken so as to avoid the cutting slices of flying.
3, strictly prohibit the sand grinding of a cutting piece
For the use of grinding wheel cutting plate, it is necessary to pay attention to the use of appropriate methods to operate, in order to ensure the high cutting efficiency and the best economic effect for different materials.