Problems needed in the use of ultra-thin cutting wheels
The author：Shandong Jinpeng abrasive tools Co., Ltd Date：2018/6/18 Click：763
Core tips：1. check carefully befＯＲe cutting the wheel to confirm whether there is any defＯＲmation， crack ＯＲ collapse.
2. when the flange is too small ＯＲ the accuracy is poＯＲ， it is easy to damage the cutting wheel. Please use it after improvement.
3.当切割砂轮标有旋转方向时，要与机床回转方向一致.相反则切割不锋利，难以发挥切割砂轮的性能.
1. check carefully before cutting the wheel to confirm whether there is any deformation, crack or collapse.
2. when the flange is too small or the accuracy is poor, it is easy to damage the cutting wheel. Please use it after improvement.
3. when the cutting wheel is marked with rotation direction, it must be consistent with the turning direction of the machine tool. On the contrary, cutting is not sharp, and it is difficult to play the performance of the cutting wheel.
4. if the cutting wheel is not matched with the cut piece, it is easy to cause abnormal wear, poor sharpness, abnormal heat and so on.
5. in the course of cutting, if an exception is found, the machine should be stopped immediately.
6. when grinding wheels are not allowed to cut by hand, it is impossible to contact the wheels with hands and bodies.
7. cutting wheel is strictly prohibited for cutting or cutting off the outside operation, and avoid abnormal because of uneven force.
8. when cutting is not sharp, the grinding wheel must be trimmed and opened. If it continues to be used, it will overheat and overload and damage the grinding wheel.
2. when the flange is too small or the accuracy is poor, it is easy to damage the cutting wheel. Please use it after improvement.
3. when the cutting wheel is marked with rotation direction, it must be consistent with the turning direction of the machine tool. On the contrary, cutting is not sharp, and it is difficult to play the performance of the cutting wheel.
4. if the cutting wheel is not matched with the cut piece, it is easy to cause abnormal wear, poor sharpness, abnormal heat and so on.
5. in the course of cutting, if an exception is found, the machine should be stopped immediately.
6. when grinding wheels are not allowed to cut by hand, it is impossible to contact the wheels with hands and bodies.
7. cutting wheel is strictly prohibited for cutting or cutting off the outside operation, and avoid abnormal because of uneven force.
8. when cutting is not sharp, the grinding wheel must be trimmed and opened. If it continues to be used, it will overheat and overload and damage the grinding wheel.